data brief for further information contact your local stmicroelectronics sales office. october 2010 doc id 18105 rev 1 1/4 4 ST6-EMU2 ST6-EMU2 emulator features step-by-step debugging breakpoints 2 trigger outputs analyzer probe input connector for up to 4 external signals parallel port interfac es to the host pc clock frequency up to 8 mhz emulation voltage: 5 v st6 assembler and linker, ast6 and lst6 st6 windows debugger, wgdb6 windows st6 microcontroller programmer, epromer st62gp-emu2 box with two flat cables for connecting a probe one db324/dip probe board for use with st6230, st6218 and st6228 target devices one db324/sdip42 probe board for use with the st6232 target device one db448 probe board for use with st620x, st621x and st622x target devices one db449 probe board for use with 5x and 6x devices, including: ? 16-pin probe with 3 different male-male interfaces, depending on the target device ? 20-pin probe with 3 different male-male interfaces, depending on the target device ? 28-pin probe with 3 different male-male interfaces, depending on the target device analyser probes three probe adapters?dip16, dip20 and dip28?to be soldered to a footprint three so adapters?so16, so20 and so28 one parallel interface cable (ref.: db25m/db25m) one power adapter one power cable two ferrites to be clipped over the flat cables (for emc compliance) description the ST6-EMU2 provides you with all you need to develop and debug programs for st6 microcontrollers. stmicroelectronics' ST6-EMU2 emulators are cost-effective solutions that provide both high quality, emulation and programming capability to support st6 application development. emulators are delivered with wgdb6, which allows debugging of st6 applications using a windows pc as the user interface. windows epromer allows the user to program application code in the st6 eprom. www.st.com
ordering information ST6-EMU2 2/4 doc id 18105 rev 1 1 ordering information table 1. device summary order code reference ST6-EMU2 ST6-EMU2 emulator
ST6-EMU2 revision history doc id 18105 rev 1 3/4 2 revision history table 2. document revision history date revision changes 27-oct-2010 1 initial release.
ST6-EMU2 4/4 doc id 18105 rev 1 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2010 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
